PSC ISO 26623-1
All tools available in various lengths and diameters!
i-tec® Shrink Fit Chucks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| i-tec® Shrink Fit Chucks Standard Design |
PSC 32 / 40 / 50 / 63 / 80 | The clamping diameter is designed for a shank tolerance of h6. |  |
| i-tec® Shrink Fit Chucks with CoolStream |
PSC 50 / 63 / 80 | The clamping diameter is designed for a shank tolerance of h6. |  |
Quick-Change Tapping Chucks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Quick-Change Tapping Chucks | PSC 32 / 40 / 50 / 63 / 80 | For holding quick-change inserts with and without safety clutches. Length compensation under pressure and tension to compensate for differences between feed rate and thread pitch. The pressure point mechanism ensures that the tap immediately engages the thread when the permissible axial force is applied. Tension latching protects the tapping chuck from damage caused by excessive axial tensile loads. |  |
Adapter Sleeves
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Adapter Sleeves for Cylindrical Shanks with Inclined Clamping Surface (Whistle Notch) |
PSC 32 / 40 / 50 / 63 / 80 | For holding shank tools with inclined clamping surfaces (2°), DIN 1835 Form E and DIN 6535 Form HE. Adjustment screw drilled through for coolant. |  |
| Adapter Sleeves for Cylindrical Shanks with Lateral Drive Surface (Weldon) |
PSC 32 / 40 / 50 / 63 / 80 | For holding shank tools with lateral drive surfaces, DIN 1835 Form B and DIN 6535 Form HB. |  |
| Adapter Sleeves for Cylindrical Shanks with Lateral Drive Surface and CoolStream (Weldon) |
PSC 50 / 63 | For holding shank tools with lateral drive surfaces, DIN 1835 Form B and DIN 6535 Form HB. With lockable CoolStream bores. |  |
| Adapter Sleeves for Morse Taper with Tang | PSC 40 / 50 / 63 / 80 | . |  |
| Adapter Sleeves for Morse Taper with Pull Thread | PSC 40 / 50 / 63 / 80 | . |
Arbor Milling Holders for Cutters with Keyway
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Arbor Milling Holders for Cutters with Keyway | PSC 32 / 40 / 50 / 63 / 80 | Cutter drive according to DIN 138. |  |
| Arbor Milling Holders for Cutters with Keyway or Cross Slot | PSC 40 / 50 / 63 / 80 | For clamping cylindrical milling cutters and cutter heads with keyway or cross slot. Cutter drive according to DIN 138. |  |
Hydraulic Expansion Chucks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Hydraulic Expansion Chucks | PSC 32 / 40 / 50 / 63 | For tools with shanks according to DIN 1835 Form A and B and DIN 6535 Form HA and HB. Shanks according to DIN 6535 Form HE can only be used in combination with reduction sleeves. Shank quality h6, Ra min = 0.3. For Ø 25 and Ø 32, only Form A or Form HA can be used. |  |
Collet Chucks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Collet Chucks for ER/ESX 25/32/40 without internal thread | PSC 32 / 40 / 50 / 63 / 80 |  |
|
| Collet Chucks for ER/ESX 16 without internal thread | PSC 32 / 40 / 50 / 63 / 80 | For clamping tools with cylindrical shanks according to DIN 1835 Form A, B, and E, and DIN 6535 Form HA, HB, and HE. |  |
Tool Holder for Screw-in Milling Cutters
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Tool Holder for Screw-in Milling Cutters | PSC 40 / 50 / 63 | For clamping screw-in milling cutters with threads. |  |
Drill Chucks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Drill Chuck with Clamping Force Protection | PSC 50 / 63 / 80 | For clamping tools with cylindrical shanks. High precision and roundness accuracy. Holding torque at clamping diameter 12mm ≥ 70 Nm. Left-right rotation. Easy operation, clamping and releasing with the supplied hex pin wrench. |  |
Drill Rods
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Drill Rods 95 / 80 Degrees (SCLCR/L) | PSC 40 / 50 |  |
|
| Drill Rods 93 / 55 Degrees (SDUCR/L) | PSC 40 / 50 |  |
|
| Drill Rods 107.5 / 35 Degrees (SVQCR/L) | PSC 40 / 50 / 63 |  |
Drill Bar Holders
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Drill Bar Holder | PSC 50 / 63 | For holding solid drills with shafts according to DIN 6595 and ISO 9766. |  |
| Slotted Drill Bar Holder | PSC 63 | For holding drill bars. More stable and vibration-free clamping, especially for long drill bars, due to full circumference clamping. |  |
Tool Holders for Turning Tools
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| 45 Degree Turning Tool Holder | PSC 50 / 63 / 80 | For ISO clamping tool holders with square shafts. |  |
| Single Axial Turning Tool Holder | PSC 50 / 63 / 80 | For ISO clamping tool holders with square shafts. |  |
| Double Axial Turning Tool Holder | PSC 50 / 63 / 80 | For ISO clamping tool holders with square shafts. |  |
| Triple Axial Turning Tool Holder | PSC 50 / 63 / 80 | For ISO clamping tool holders with square shafts. |  |
| Radial Turning Tool Holder | PSC 50 / 63 / 80 | For ISO clamping tool holders with square shafts. |  |
Parting Tool Holder
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Radial Parting Tool Holder | PSC 63 | For holding parting blades. |  |
Drill Holder
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Drill Holder | PSC 32 / 40 / 50 / 63 / 80 | For holding drills with a shaft according to DIN 6595 and ISO 9766. |  |
Clamping Holder
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Clamping Holder 95 / 80 Degrees (DCLNR/L) | PSC 40 / 50 / 63 |  |
|
| Clamping Holder 93 / 55 Degrees (DDJNR/L) | PSC 40 / 50 / 63 |  |
|
| Clamping Holder 93 / 55 Degrees (SDJCR/L) | PSC 40 / 50 / 63 |  |
|
| Clamping Holder 95 / 80 Degrees (DWLNR/L) | PSC 40 / 50 / 63 |  |
|
| Clamping Holder 62.5 / 55 Degrees (SDNCN) | PSC 40 / 50 / 63 |  |
Extensions
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Extensions Axial Tension | PSC 32 / 40 / 50 / 63 / 80 | For holding PSC tools according to ISO 26623-1, d1 = nominal size PSC. |  |
Reducing Sleeves
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Conical Reducing Sleeves | PSC 40 / 50 / 63 / 80 / 80X | For holding PSC tools according to ISO 26623-1, d1 = nominal size PSC. |  |
| Cylindrical Reducing Sleeves | PSC 40 / 50 / 63 / 80 / 80X | For holding PSC tools according to ISO 26623-1, d1 = nominal size PSC. |  |
Sealing Plugs
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Sealing Plugs | PSC 40 / 50 / 63 / 80 / 100 | For sealing machine spindles, multi-spindle heads, etc. As protection for PSC spindles against contamination by chips, coolant, etc. |  |
Tool Blanks
| PSC Sizes | Design / Note | Representation | |
|---|---|---|---|
| Tool Blanks | PSC 40 / 50 / 63 / 80 / 100 | For the self-manufacturing of special tools. Taper with flange hardened. Taper with flange hardened according to ISO 26623-1. Taper and flat surface ground. Shaft with center unhardened for further processing. |  |